|
CP® Turbo Nozzles for floaters or sprayers
generate consistent large droplets with few driftable fines through
a wide range of pressures. They are available in both low and high
volume versions with 8 orifices each (from .43 to 10.04 6PM at 30
PSI) for floaters and with six orifices for
sprayers. ‘Ihey are also available as the CP® Floater Combo in both
volumes. The three stainless steel deflector tips take care of two
or three orifices. Applicator dials in orifice of choice then turns
to the appropriate deflector tip.
C P® Combos incorporate selectable nozzles and check valves
in one uit and combine with 3-way, turbo or carousel nozzles.
8 Orifices
The CP® Combo, Floater Check Valve and Split Eyelet Check
Valves CP® CheckValves replace
traditional air, solenoid or diaphragm-type
check valves. Using a simple needle/seat design,
they provide instant shut-off and, in most
eases, one pull of the stem will stop drips.
CP® Split Eyelet Check
Valve 4.5 GPM @30 PSI
|
CP® Carousels...
Truly Custom Nozzles |
|
* 3-Tip or 6-Tip versions
*23 tips to choose from, including
110° Raindrop® Ultras
80° Drift Reduction Tips
80° Standard Tips
*Flow rates ranging from .13 GPM to 2.17 GPM at 30 PSI
* Durable—glass filled nylon body, Teflon seal, Viton® gasket |
|
